============================================ Service Lift: Model ISO-D service lift Type: Hinged doors serving at floor level ============================================ The service lift ISO-D is ideally suited for pubs, offices and industrial premises where heavier items need to be loaded from floor level. The ISO-D has single or double-hinged doors. Features Service Lift Car - Made of folded stainless steel or galvanised steel sheets, centred suspension, guided on both sides with adjustable guide shoes. All units serving on counter height are supplied with a removable shelf. Increments of 25mm are available. Steel Structure - Galvanised steel structure made of cold rolled special profiles, premounted in 2m sections, including trunking. Landing Doors - Approved to DIN 18092 and 18090 available as bi-parting, single or double hinged. Approved door locks. Bi-parting doors suspended with two flexible steel ropes, guided by aluminium sheaves in the lift car. All doors have pre-installed frame surrounds for easy installation. Machine Room Door - Single hinged door, double hinged for widths over 800mm, galvanised finish, with lock, including frame surrounds. Counterweight - Steel frame with 50 x 50mm steel inserts. Adjustable guide shoes with polymide inserts. Drive Unit - Up to 100kg capacity with sheave drive for two or three ropes. Units with 200 and 300kg capacity with chain drive for two chains, high quality reduction gear with motor, magnetic disc brake and handwheel. Insulation class IP 54 Control 24 volt system on all push button units Prewired and plug-in-system Call and send on each landing station Fully automatic push buttons Arrival buzzer and call signal Position indicator on each landing station Overload protection installed on control panel -------------------------------------------- Performance and Dimensions: Model: Titan 1000kg capacity Lift Speed 0.15 - 0.27m/s Lift Car Width 500 - 1000mm in 50mm increments Lift Car Depth 600 - 1000mm in 50mm increments Lift Car Height 800 – 1200mm in 100mm increments Shaft Width min. Lift car width + 325 - 350mm Shaft Depth min. Lift car depth + 110 - 250mm Headroom min. door height + 800 - 1500mm Pit min. 350 - 600mm